Waco homes built before 1970 in neighborhoods like Dean Highland and Sanger Heights often have cast-iron drain lines and narrow 5-foot tubs that complicate conversions. Humidity lingers after spring storms, so we use mold-resistant backer board and epoxy grout instead of standard cement board and sanded grout. McLennan County inspectors require a 2% slope to the drain and a water-resistant membrane behind the tile; skipping either triggers a redo.
Curbless entries help homeowners in South Waco and North Waco age in place without tripping hazards, but the slab-on-grade foundations common here mean we sometimes cut into the concrete to lower the drain. Hot, humid summers accelerate mildew on porous materials, so we specify porcelain tile and pre-sloped foam pans rather than acrylic bases that trap moisture. Nearby Temple and Killeen jobs show the same pattern: older plumbing needs re-piping before the new shower valve goes in.
We always verify the existing vent stack location before demo because many East Waco and Baylor-area houses run vents through exterior walls that are now covered by additions. Spring storms can send water under the slab, so we install a secondary moisture barrier and ensure the new shower pan sits above grade. These steps prevent callbacks that would otherwise appear after the first humid summer.
Local Housing Realities
Older Waco stock frequently has 1/2-inch supply lines that cannot support high-flow shower heads without pressure drops. We upslope the new PEX lines during every conversion to maintain flow while meeting current McLennan County water-efficiency rules.
Technician insight
In Waco the thing that catches most people out with tub to shower conversions is the combination of slab-on-grade foundations and older cast-iron drains in neighborhoods like Sanger Heights and Dean Highland. Humidity after spring storms makes any missed moisture barrier show up as mold within one summer. We always pull the old drain line first so we know exactly what we are tying into before the tile goes down.
South Waco Slab Conversion
Homeowner in South Waco wanted a curbless shower but the existing tub sat on a raised section of slab. We found the original cast-iron drain had settled and was pitched backward. We cut the slab, re-pitched the line with new PVC, installed a linear drain pan, and finished with porcelain tile. The shower now drains cleanly even after heavy spring rains.
Tub to Shower Conversions Services We Offer
✓Curbless Shower Conversions
Remove the tub and install a zero-threshold shower with linear drain, ideal for homes in Baylor and East Waco where residents want easier access without major floor changes.
✓Walk-In Shower Replacements
Swap standard tubs for 48- to 60-inch walk-in showers using pre-sloped pans that handle Waco's occasional heavy spring rains and high indoor humidity.
✓Accessible Shower Design
Add fold-down seats, grab bars, and handheld wands sized for McLennan County code while keeping the footprint inside existing 5-by-8-foot bathrooms common in Sanger Heights.
✓Shower Pan and Drain Upgrades
Replace failing fiberglass pans and cast-iron drains with modern PVC and foam systems that resist the soil movement seen around Cameron Park and the Brazos river bottoms.
✓Tile and Waterproofing for Showers
Install porcelain tile over waterproof membranes that stand up to Waco's prolonged summer humidity and prevent leaks into neighboring rooms.
Tub to Shower Conversions Cost in Waco, TX
| Service | Typical Range | What Affects It |
|---|---|---|
| Standard Tub-to-Shower Conversion | $4,500–$6,500 | Basic tile and acrylic pan; price rises with linear drains or custom niches. |
| Curbless Accessible Conversion | $6,000–$9,500 | Includes floor modification on slab homes common in South Waco and Baylor. |
| Plumbing Rough-In Update | $800–$1,800 | Required when cast-iron lines are found in pre-1960 East Waco houses. |
| Premium Tile Upgrade | $1,200–$2,400 | Large-format porcelain and niche work instead of standard 12x24 tile. |
Ranges are typical for Waco, TX and confirmed with an exact written quote before any work starts.
How it works
- 1
Site Assessment
Measure the existing tub space, check drain location, and note plumbing access in homes typical of West Waco and Dean Highland.
- 2
Design And Material Selection
Choose curbless or low-curb layout, tile, and fixtures rated for humid conditions while meeting McLennan County requirements.
- 3
Demo And Rough-In
Remove the tub, update supply and drain lines, and install the new pan or pre-slope system with proper membrane.
- 4
Tile, Finish, And Inspection
Set tile with epoxy grout, install trim and hardware, then schedule the county inspection before final use.
Pricing
Most tub to shower conversions in Waco fall between $4,500 and $9,500 depending on tile choice, plumbing access, and whether the floor must be lowered.